Roof sheathing cleaning
Plywood and OSB decking with dark staining is cleaned with dry ice blasting, soda blasting, or HEPA sanding, depending on severity and the contractor's equipment.
Home inspector found dark staining on your roof sheathing? Seeing frost on nail tips in winter? Breffni Remediation connects you with licensed and insured independent attic mold removal contractors in Orem who clean the decking, correct the ventilation, and stop the condensation causing it.
Warm, moist air from bathrooms, kitchens, and living spaces leaks into the attic, hits cold roof sheathing, and condenses. Without enough ventilation, that moisture feeds mold on the underside of the roof deck.
Answered day and night, holidays too.

Attic jobs fail when they stop at cleaning. These are the standards we look for in the contractors we refer.

The quote separates sheathing cleaning, insulation work, and ventilation corrections, so you know what each fix costs before anyone climbs the ladder.
Contractors use media blasting or hand cleaning, HEPA vacuums, and air filtration suited to working overhead in a tight attic.
Need it done before closing or before new shingles go on? Tell the dispatcher and we'll prioritize your call.
Attic work means walking joists, working near wiring, and sometimes cutting new vents. The pros we route you to carry their own insurance and required licensing.
Here's what independent contractors in our network handle most often in attics.
Plywood and OSB decking with dark staining is cleaned with dry ice blasting, soda blasting, or HEPA sanding, depending on severity and the contractor's equipment.
Fans and dryer vents that end in the attic get rerouted outside, removing a major moisture source.
Insulation pushed against the eaves can block soffit intake. Baffles restore the air channel, and ridge or roof vents are checked so air flows from low to high.
Contaminated blown cellulose or batts may need removal. Air sealing around top plates, recessed lights, plumbing stacks, and the attic hatch cuts the warm air leaking up from the house.
A protective coating can go on once the decking is clean and dry, as an added layer rather than a shortcut.

Four steps, with photos from up top.
Share the inspection notes if you have them so the contractor knows what to look for.
Expect a close look at where the moisture comes from, not just where it ended up.
The quote shows what needs cleaning and what needs fixing so it stays clean.
You get proof of the work in photos, plus confirmation that the ventilation changes are in place.

One free call gets a local attic mold pro to take a look.
Speak to Dispatch: +1-844-326-4757
A few recent attic jobs.

The home inspector flagged black staining on the north side of the roof. The contractor found both bathroom fans venting straight into the attic. They dry ice blasted the decking and ran the ducts out through roof caps.
Every winter we'd get water spots on the bedroom ceiling. It turned out to be frost on the nails melting. They cleared the soffits, installed baffles, and sealed around the can lights. No spots this year.
A new roof was already on the schedule, so the contractor cleaned the sheathing first and coordinated with the roofer on adding a ridge vent. Good timing saved us a second trip.
Photos of the cleaned attic saved our closing. The buyer's agent had questions and the report answered every one of them.
Usually warm, humid air from the house condensing on cold roof sheathing, made worse by exhaust fans venting into the attic, blocked soffit vents, or poor air sealing. Roof leaks are another cause.
Yes. Ongoing moisture can degrade roof sheathing, rust nails, soak insulation, and show up as ceiling stains or odors. It's also commonly flagged during home sales.
Only if the wood is rotted or delaminating. Cleaning handles most attic mold.
A cleaning technique that uses frozen carbon dioxide pellets to remove mold without water or abrasive residue.
They shouldn't. Ducting them outside is a simple fix that often solves the problem at its source.
Most attic jobs take one to three days, depending on attic size, access, the cleaning method, and how many ventilation corrections are needed.
We route attic mold calls from across Orem to independent contractors who understand local roof styles and climate.
Common Orem service zip codes include 84097 84058 84059 84057.
Nearby cities we also serve sit in the list below.
Check Coverage: +1-844-326-4757